|
 |
| Features: |
- Direct conversion of HL HRA ,HRB ,HRC ,HB .HV, HS; Conversion to tensile strength
- Matrix LCD, showing all functions
- Menu operation, easily to operate
- Seven different kinds of impact device are available, distinguish automatically, no need calibration
- On-board memory holds 48-350 groups of data
- Upper/lower limits setting and sound alarm
- Help key is available for all the operation interfaces
- Backlight for convenient use in darkness
- Software calibration
- Any test value can be printed directly
- RS232 connector, many connecting ways to satisfy different requirements
- Easy to replace rechargeable battery
- Easy to change rechargeable battery
|
|
| |
Measuring range |
(170-960)HLD (17.9-69.5)HRC |
Hardness scale |
HLD,HB,HS,HRA,HRB,HRC,HV |
Measuring direction |
360° |
Tolerance |
±6HLD(when HLD=760) |
Repeatability |
6HLD(when HLD=760) |
Diameter of printer paper |
40mm |
Width of printer paper |
44.5±0.5mm |
Power |
12V/600mmA |
Charging time |
2-3.5 hour |
Humidity |
≤90% |
Operating temperature |
0℃-40℃ |
Weight |
0.6kg |
Overall dimensions |
234×88×46mm |
Max.Workpiece Hardness |
Refer to "Technical specification of impact devices" below |
Min.Radius of Workpiece (convex/concave) |
Min. Workpiece weight |
Min. Workpiece thickness |
Min. thickness of hardened layers |
Measuring range |
Refer to “wide measuring range of TIME hardness testers” and "testing accuracy and repeatability" below |
Accuracy |
|
|
| Standard delivery |
Optional accessories |
| |
●Main unit
●Impact device type D
●Small support ring
●Printing paper
●Nylon brush
●Leeb hardness test block
●Charger
●TIME certificate
●Warranty card
●Instruction manual |
●Communication cable
●Special impact device
●Support rings
●Nylon brush(when selecting impact device type G) |
|
| |
|
|
